Detailed Program

Home
Program
Detailed Program

Conference schedule

Day 0: July 1

16:00-20:00

Welcome reception & registration

Day 1: July 2

8:00-8:20

Registration

8:20-8:30

Opening remarks

Location: Room A : 2F Hall

8:30-9:50

Plenary talks
(Chair: Mikio Sakai)

Location: Room A: 2F Hall

Industrial applications of DEM, coupling to other methods to solve multiphase and multiscale problems and the importance of particle shape

Paul Cleary

Multi-Scale Modelling of Dense Particulate Flows with Mass, Momentum and Heat Exchange -Current Status and Future Challenges in CFD-DEM Approaches

Hans Kuipers

9:50-10:10

Coffee break

10:10-12:00

Morning Session
(Chair: Mikio Sakai/Yuki Tsunazawa)

Location: Room A: 2F Hall

Advanced Modelling & Simulation for Discrete Element Methods

Yong Zhang, Junwu Wang, Wei Ge, and Chenlong Duan, "Discrete simulation of the gas-solid flow containing polydisperse particles with significantly different sizes"

Hiroki Oba, Michio Otsuki, "Scaling laws for fluidized layer of granular materials in rotating drums"

Keynote Lecture:
Kimiaki Washino, Ei L. Chan, Eisuke Ishimaru, Takuya Tsuji, and Toshitsugu Tanaka, "Simulations of three-phase flows with irregularly shaped particles using resolved CFD–DEM coupling model"

Invited Lecture:
Takuya Tsuji, Yosuke Kanada, Kimiaki Washino, and Toshitsugu Tanaka, "Characteristics of Wave Propagation in an Incipiently Fluidized Bed"

Morning Session
(Chair: Takashi Matsushima)

Location: Room B: 4F 407 Room

Advanced DEM Analysis in Geotechnical Engineering

Jian Chen, Daisuke Nishiura, and Mikito Furuichi, "Discrete Element Modeling of Landslides: How Grain Size and Entrainment Affect Runout"

Yuval Keissar, Ian Brown, Michael Gardner, and Nicholas Sitar, "Capturing 3D Kinematics in Rock Slope Failure"

Deyun Liu, Meng-Ze Lyu, and Jidong Zhao, "Quantifying the impact of coupled particle-scale uncertainty on the behavior of granular soils: A micromechanical study"

Invited Lecture:
Xiaoxia Guo, Ting Qiao, and Shunying Ji, "Crushable polygon mesh discrete element method for simulating irregular granular materials"

Keynote Lecture:
Huan Geng, J.P. Morrissey, Kasia Zamara, Jacek Kawalec, and Jin Y. Ooi, "Exploring geogrid-soil interaction in a geogrid stabilised granular soil"

Morning Session
(Chair: Rouven Weiler)

Location: Room C: 4F 408 Room

Industrial Application of DEM & CFD-DEM

Keynote Lecture:
Christoph Kloss, Marcel Kwakkel, Riccardo Togni, Alice König, Augusto Moura, and Christoph Goniva, "From model fidelity to fast results, from open source to proprietary, from development to deployment"

Marcel C. van Benten, Johan T. Padding, and Dingena L. Schott, "A Dual-Regime DEM Framework for Modelling Time Consolidation"

Kizuku Kushimoto, and Junya Kano, "Development of a new fracture model with uniquely determined parameters"

Wei Pin Goh, and Mojtaba Ghadiri, "DEM Simulation of Particle Attrition in Mechanofusion Device"

Morning Session
(Chair: Shunying Ji/Hideya Nakamura)

Location: Room D: 4F 409 Room

Coupled discrete element method and computational fluid dynamics

Invited Lecture:
Limin Wang, and Shaotong Fu, "Coupled lattice Boltzmann method and discrete element method for discrete simulations of gas-solid fluidization"

Invited Lecture:
AnghaoLi, Zaizheng Wang, Haoyu Shi, Min Sun, and Decai Huang, "Density-driven segregation of binary granular mixtures in a vertically vibrating drum: the role of filling fraction"

Nathan Coppin, Miguel Cabrera, Mathieu Renouf, and Emilien Azéma, "Numerical simulation of partially immersed column collapses of grains with irregular shapes"

Lianyong Zhou, and Yongzhi Zhao, "Development and validation of a wide grid/particle size ratio CFD-DEM method for non-spherical particles"

12:00-13:00

Luncheon seminar

Location: Room B: 4F 407 Room

LS1, KOZO KEIKAKU ENGINEERING Inc.

Luncheon seminar

Location: Room C: 4F 408 Room

LS2, Nippon Paint Holdings Co., Ltd.

Luncheon seminar

Location: Room D: 4F 409 Room

LS3, Anton Paar Japan K.K.

13:00-13:40

Plenary talk
(Chair: Toru Ishigami)

Location: Room A: 2F Hall

Discrete Elements Simulations including Fragmentation - Models and Challenges

Thorsten Pöschel

13:40-14:00

Coffee break

14:00-16:10

Afternoon Session I
(Chair: Nicolin Govender/Toshiki Imatani)

Location: Room A: 2F Hall

Particle shape and its role in industrial applications

Keynote Lecture:
Johannes Khinast, "Use of DEM to Optimize, Scale and Control Pharmaceutical Manufacturing Operations – A Continuing Success Story"

Felix Buchele, Patric Müller, and Thorsten Pöschel, "Image-based spherical decomposition of 3D geometries"

Peter Bohling, Martina Trogrlic, Dalibor Jajcevic, Marta Moreno-Benito, Steve Lathrop, Daniel O.Blackwood, Johannes G. Khinast, and Pankaj Doshi, "Increasing the throughput of a Continuous Mixing Technology by using Discrete Element Method Simulations"

Lucas Fedalto, Fernando Augusto Pedersen Voll, Éliton Fontana, Liz Del Cid, and Nicolin Govender, "Mixing Simulations of an In-Bin Blender Using Polyhedral Particles"

Yuji Kobayashi, Tetsuya Inukai, and Mikio Sakai, "Simulation and analysis of the mixing state in the High speed flow type mixer"

Afternoon Session I
(Chair: Jin Y. Ooi)

Location: Room B: 4F 407 Room

Advanced DEM Analysis in Geotechnical Engineering

Xuefeng Song, Fei Dai, Fengwei Zhang, and Wuyun Zhao, "Ridge-forming and soil-covering process for whole film-mulching and double ridge-furrow using discrete element method"

Chun Feng, Eugenio Oñate, Ignasi de Pouplana Sardà, Shihai Li, and Xinguang Zhu, "A novel FEM and DEM hybrid model to simulate fracture and fragmentation process of rock"

Mikito Furuichi, Daisuke Nishiura, Sota Arakawa, Jian Chen, Ryuta Arai, Dye S K Sato, and Satoshi Ide, "Granular simulation of earthquakes in geological-scale structural evolution"

Dariel Hernandez-Delfin, Jose Salomon, David M. G. Taborda, and Catherine O’Sullivan, "Refining advanced constitutive models using DEM-generated data"

Invited Lecture:
Masahide Otsubo, Itsuki Sato, Yang Li, and Hidenori Takahashi, "Towards advanced rubble mound design approaches for port structures"

Afternoon Session I
(Chair: Christoph Kloss)

Location: Room C: 4F 408 Room

Industrial Application of DEM & CFD-DEM

Keynote Lecture:
Mohammed B.A. Hassan, F. Charruault, B. K. Rout, F. N. H. Schrama, N. Dogan, J. A. M. Kuipers, and Y. Yang, "DEM simulation of scrap charging and mixing in a steelmaking furnace"

Raisa Roeplal, Yusong Pang, Allert Adema, Jan van der Stel, and Dingena Schott, "Calibration and application of a full-scale blast furnace mixture charging model"

Zhouzun Xie, and Yansong Shen, "High-fidelity modelling of unburnt coal flow in an industry-scale blast furnace using a hybrid CFD-DEM method"

Lawrence Sidney Bbosa, Dion Weatherley, and Temitope Oladele, "Exploring breakage mechanisms in partially confined particle beds using the Bonded Particle Model in DEM"

Shintaro Kajiwara, and Mikio Sakai, "DEM-CFD simulation on solid-liquid mixing in an industrial mixing cooker"

Afternoon Session I
(Chair: Limin Wang/Takeru Yano)

Location: Room D: 4F 409 Room

Coupled discrete element method and computational fluid dynamics

Invited Lecture:
Xiaoyan Ye, and Zhao Zhang, "Solid-Liquid-Gas-Like Phase Transition in Electric Field Driven Dense Granular Media"

Invited Lecture:
Weile Luo, Fengxian Fan, Eric J. R. Parteli, and Thorsten Pöschel, "Inertia Migration of a Sphere in Circular Poiseuille Flow Revealed by CFD-DEM simulations"

Huaqing Ma, Lianyong Zhou, Zihan Liu, Zongqing Zhou, Kaiwei Chu, and Yongzhi Zhao, "Numerical modeling of cross-scale particle-fluid flow by a non-hybrid CFD-DEM coupling method "

Takumi Tazaki, Eiji Harada, and Hitoshi Gotoh, "3D DEM-MPS simulation of cross-shore beach morphodynamics and gravel transport under regular breaking wave"

Nabil Younes, R. Wan, A.Wautier, O. Millet, and F. Nicot, "Microscale approach for studying partially saturated granular materials: DEM-LBM coupling"

16:10-16:50

Coffee break/Poster session

Section I

I-01	Incorporating the Tavares UFRJ Breakage Model for Accurate Particle Fracture Analysis during Battery Electrode Calendering Simulations Jiashen Chen, Maryam Asachi, Ali Hassanpour, Meisam Babaie and Masoud Jabbari
I-02	DEM–CFD simulation on sequential powder die-filling processes in a rotary tablet press Arata Hashimoto, and Mikio Sakai
I-03	Implementation of an Ultrasonic Field Approach for Particle Levitation with DEM Simulations Dimitri Ivanov, Marvin Röhl, Trung Anh Nguyen, Jan Raffel, Christoph Lotz and Carsten Schilde
I-04	Investigation of Granular Behavior in a Vertically Vibrating Pipe by Using DEM Akihiro Okamoto, Takuya Tsuji, Masato Adachi, Sota Suzuki, Kimiaki Washino
I-05	Comparison of Grid Generation Methods for Contact Detection of Non-spherical Particles Denis Lobovikov, Elena Matygullina, and Polina Emshanova
I-06	Characterizing accuracy of coarse-grained DEM for granular shear flow with rolling resistance Kyota Mitsunashi, Hideya Nakamura, Shota Yokokawa, Naoki Kishida, Shuji Ohsaki and Satoru Watano
I-07	Neural Networks for Polydisperse Discrete Element Methods (NN4DEM) Tongan Yang, Jiansheng Xiang, Boyang Chen, Sadjad Naderi, Claire Heaney, Christopher Pain, Yanghua Wang, and John-Paul Latham
I-08	Surrogate model of DEM simulation of vertical high shear mixer Tamana Ichida, Hideya Nakamura, Shuji Ohsaki, and Satoru Watano
I-09	Analysis of metallurgical coke breakage to investigate pore structure effects using X-ray CT and Discrete Element Methods (DEM) Masahiko Watanabe, Zeynep Karatza, and Jin Y. Ooi
I-10	Impact of Crystal Diffusion on Crust Formation in a Drying Saline Droplet Benjamin Mignot, Tariq Mahmud, Peter J. Heggs, Mojtaba Ghadiri and Kevin J. Roberts
I-11	Fluid analysis inside a spiral jet mill using a reduced order model(ROM) with proper orthogonal decomposition(POD) Tatsuya Onishi, Kenji Jikihara, Keitaro Nakamura, Shuo Li, and Mikio Sakai
I-12	Effectiveness and Limitation of Volume-Interacting Level Set DEM (VLS-DEM) Kenta Okuno, Takuya Tsuji, Kimiaki Washino, and Toshitsugu Tanaka
I-13	Numerical simulation of the influence of bedding plane on hydraulic fracture reorientation based on discrete element method Yuhang Lin, and Chun Liu
I-14	UniDEM, a 3D DEM software for coupled solid body simulations László Pásthy, and Kornél Tamás
I-15	“Interface-resolved DNS studies on multiphase flows with finite-volume flexible fibers” Junjie Chen, and Yu Guo
I-16	Numerical investigation on the mesoscopic mechanism of erosion above uniform and graded sediment under oscillatory flow using the CFD-DEM method Shuye Zhang, Zhen-yu Yin, and Huihuan Ma
I-17	Multiscale investigation on explosive dispersal of granular media Lvlan Miao, and Kun Xue
I-18	Transition between 1D and 3D intraparticle representations for heat transfer in DEM-CFD simulations Maximilian Brömmer, Enric Illana, and Viktor Scherer
I-19	Unraveling Segregation Mechanisms during Spray Drying of Bidisperse Suspensions via CFD-DEM coupling Silas Wolf, Boris Krasovitov, Andrew Fominykh, Avi Levy, and Carsten Schilde
I-20	Point-based coarse graining CFD-DEM method for dilute to very dense particle-fluid systems Yuxiang Liu, and Lu Jing
I-21	A Novel Hybrid CFD-DEM Model for Simulating Scouring around Offshore Wind Turbine Foundation with Riprap Protection Dongkai Li, Zhihao Shen, and Gang Wang
I-22	Polymer-Induced Bridging Flocculation of Hematite Particles Using CFD-DEM Simulations Lequan Zeng, Jackquline C. Eardley, George V. Franks, and Eirini Goudeli
I-23	Validation of Bubble-Particle Attachment Model Using Three-Phase CFD (VOF)-DEM Simulation Tareq M. Al-Shami, Lequan Zeng, Eirini Goudeli, and George V. Franks
I-24	Investigation of the Influence of Interparticle Forces on the Rheological Behavior of Micro Particle Suspensions with Unresolved Coupled CFD-DEM Simulations Dimitri Ivanov, Mahmoud Eslami Pirharati, Inka Mai and Carsten Schilde

Section II

II-01	Role of floating grains in liquefaction on granular media Carolina Castro-Malaver, Manuel Cárdenas-Barrantes, Mathieu Renouf, David Cantor, Emilien Azéma, Carlos Ovalle, and Arcesio Lizcano
II-02	Fully-resolved LBM-DEM simulations of piping erosion during a suction bucket installation Samuel Kemmler, Pablo Cuéllar, Antoni Artinov, and Harald Köstler
II-03	Micromechanical Analysis of Natural Hydrate-Bearing Sediments During Gas Extraction Considering Hydrate Dissociation and Particle Breakage Chengkai Xu, Pei Wang, and Zhen-Yu Yin
II-04	Time-dependent fragmentation of particles in a corrosive environment P. Quiroz-Rojo, D. Cantor, M. Renouf, C. Ovalle and E. Azéma
II-05	Sensitivity Analysis on Critical Combinations of DEM Input Parameters in Granular Flow Analysis Junsen Xiao, Kenta Tozato, Reika Nomura, Yu Otake, Kenjiro Terada, and Shuji Moriguchi
II-06	A Review of the Mechanisms of Solid-Fluid State Transition in Geotechnical Granular Media Fei Li, Yihui Feng, Jinan Wang, Yidan Sun, SiYin Wu, and ZhiFeng Liang
II-07	Friction in Particle-Scale Models of Clay Yohei Nakamichi, Catherine O'Sullivan, Paul Tangney and Stefano Angioletti-Uberti
II-08	Effect of Particle Shape on Cohesion and Friction Angle in Clay studied by DEM Biaxial Shear Simulations Zhipeng Yu, Dominik Krengel, and Takashi Matsushima
II-09	The effect of rib inclination angle of reinforcements on the pullout resistance evolution Takeru Tamaoki and Ryunosuke Kido
II-10	Flexible Fiber Cluster-induced Resistance to Shock Waves Peng Wang, Kun Xue, and Yu Guo
II-11	Moment of Inertia of a Granular Mixture during Axial Segregation Aldrex D. Dacara, and Junius André F. Balista
II-12	Numerical analysis of grains with different aspect ratios in triangular obstacle silo Huhu Chen, Xuefeng Song, Fengwei Zhang, Fei Dai, Dongyu Liu, and Rongxu Shi
II-13	Accurate 3D Particle Reconstruction Using Large Vision Models Ruidong Li, Zhen-Yu Yin, Shao-Heng He, and Brian Sheil
II-14	Influence of shape randomness on the microstructure of granular materials: a 3D DEM investigation Duc-Cuong Pham, Farhang Radjai, Duc-Hanh Nguyen, and Lhassan Amarsid
II-15	Particle Shape Effects on Packing and Heat Transfer in Moving Beds Aidana Boribayeva, Assiya Baigarina, Arsen Musahanov, and Boris Golman
II-16	Pivoting Friction Effects from the Rising Egg Problem to the Stability of Heaps Shotaro Waki, Dominik Krengel, and Hans-Georg Matuttis
II-17	Study of the bubbling phase of a 3D pilot-scale bubbling fluidized bed simulated with CFD-DEM using the coarse-graining method Théo Ndereyimana, Yann Dufresne, and Stéphane Moreau
II-18	Elucidation on the suction effect on powder die filling by DEM-CFD simulation Masafumi Komiya, and Mikio Sakai
II-19	Numerical simulations of debris bed formation by CGDEM-CFD Boen Li, Toshiki Imatani, and Mikio Sakai
II-20	Towards accelerated multi-scale modelling of wet granulation processes using Coarse-Grained DEM and Graph Network Analysis Roxana Saghafian Larijani, Stefan Luding, and Vanessa Magnanimo
II-21	Simulation of Granulation Operation Using Discrete Element Method : A Coarse-grained Model Considering Liquid Bridge Forces. Osuke Hattori, Hidehiro Kamiya, Yutaro Takaya, and Chiharu Tokoro
II-22	DEM simulation of media stirred mill performance using different size and material media Yuki Murata, Hidehiro Kamiya, Osamu Ishikawa, Satoshi Shina, Yuma Hatakeyama, Yutaro Takaya, and Chiharu Tokoro
II-23	Multi-scale Numerical Modelling of Excavation Support Fluids Yongxin Wang, Si Suo, Martin Blunt, and Catherine O’Sullivan

Section III

III-01	Stability Analysis of Cylindrical Columns Made of Wet Granular Materials Ryusuke Inoue, and Michio Otsuki
III-02	Formation of Focused Granular Jets: A DEM Simulation Study Dongyun He, Kazuya U. Kobayashi, Pradipto, Prasad Sonar, and Yoshiyuki Tagawa
III-03	CFD-DEM simulation of particle removal in channel-cavity flows Minh Tam Nguyen, Junyoung Park, and Dongjoo Kim
III-04	Stabilizing Coupled FEM-DEM Simulations of Submerged Barchans with an Improved Choice of Boundary Conditions Gamaliel Jeevan Dewanto, Pawel Deren, and Hans-Georg Matuttis
III-05	Micromechanic simulation of liquefaction under vibration Kanata Yamashita, Gamaliel Jeevan Dewanto, and Hans-Georg Matuttis
III-06	Effect of parameters on hopper blockage by DEM Mitsumasa Kimata, and Yuri Haneishi
III-07	Drag Forces Working on Large Spheres Sinking / Floating in Gas-Fluidized Beds Shinichi Matsumoto, Takuya Tsuji, Kimiaki Washino, Toshitsugu Tanaka, Jun Oshitani, and Shusaku Harada
III-08	Numerical Model for Dense Particulate Multiphase Flows with Chemical Reactions Yuki Yakata, Takuya Tsuji, Kimiaki Washino, Toshitsugu Tanaka, and Ryoichi Kurose
III-09	Numerical analysis on failure mode of 3D columnar polycrystalline ice based on discrete element method Dianzhe Li, Lu Liu, and Shunying Ji
III-10	Transition in granular flow in a silo through the lens of acceleration fields Deepak Sharma, and Ashish Bhateja
III-11	Experimental and numerical analysis of fine powder bed compaction under artificial gravity for Additive Manufacturing Zhazira Berkinova, Assem Sauirbayeva, Almaz Kenzheshov, Boris Golman, and Christos Spitas
III-12	Outcomes and Learnings from 4 Years of Research on DEM Calibration B.D. Jenkins, A.L. Nicusan, A. Neveu, G. Lumay, F. Francqui, J.P.K. Seville, and C.R.K. Windows-Yule
III-13	A determination method of DEM parameters using post-excavated soil geometry data Naoki Iikawa, and Masanori Sato
III-14	CFD-DEM Simulation of Particle Deposition and Clogging Between Two Adjacent Fibers Jaesung Choi, and Dongjoo Kim
III-15	Numerical Simulation on Breakup and Granulation of Copper Slag Yuchen Jiang, Yunan Chen, and Bin Chen
III-16	Simulation of Particle Removal from a Flat Surface by Combining Blowing Jets and Suction Minsu Kim, Junyoung Park, and Dongjoo Kim
III-17	Inter-particle Force Modelling to Simulate Noodle Dough Using DEM Yui Sasaki, Kenya Kuwagi, Mei Kawahara, Yoshimasa Yagiri, Teppei Yokomizo, and Yasuo Suzuki
III-18	Industrial Applications of DEM Introduction to Powder and Fluid Simulation Software "iGRAF Shoma Kato, Vidura Gamage, Junya Aono, Mitsuaki Matsuo and Yohsuke Matsushita
III-19	Dynamics of underwater granular collapse on rough beds by CFD-DEM simulation Menghan Pan, Jiajun Jiao, Xiaoliang Wang, and Qingquan Liu
III-20	Recent developments in iGRAF: Coupling of DEM and DPM Yohsuke Matsushita, Junya Aono, Shoma Kato, Vidura Gamage and Kaoru Watanabe
III-21	Exploration of percolation in large size ratio two-sized vibrated systems using DEM A. Wiggin, C. R. K. Windows-Yule, T. Abadie, S. Fong and P. D. D. Monks
III-22	Numerical Simulation of Electrode Structure Considering Shape Anisotropy of Active Material in All-Solid-State Batteries Koki Sato, Magnus So, Takeru Yano, Shusaku Asano, and Gen Inoue
III-23	Investigating compression properties of solid electrolyte powders for all-solid-state lithium-ion batteries Motoshi Iwao, Hideya Nakamura, Takamasa Asano, Atsushi Sakuda, Akitoshi Hayashi, Shuji Ohsaki and Satoru Watano
III-24	Numerical analysis of consolidation and agglomerate disintegration behavior of bimodal-sized particles under compression and shear application Hiroaki Yoshitomi, Takeru Yano, and Shuji Ohsaki, Hideya Nakamura, and Satoru Watano
III-25	CFD-DEM Study of the Effect of Particle Shape on the Hydrodynamics of a Fluidized Bed Ainkara Karthiga R, Narasimha Mangadoddy, Vikrant Verma

Section IV

IV-01	High-speed Simulations using Multi-timescale Reduced-Order Model in Gas-Solid Flows of a Large-scale Fluidized Bed Kai-en Yang, Shuo Li, and Mikio Sakai
IV-02	Reduced-order Modeling of Heat Transfer in Gas-Solid Flows with Deep Learning Michael Castro, Shuo Li, Kai-en Yang, Toshiki Imatani, and Mikio Sakai
IV-03	A Novel Data-driven Reduced-order Model for the Real-time Prediction of Gas-solid Heat Transfer in Fluidized Beds Xiaofei Li, Junjie Lin, Shuai Wang, Kun Luo, and Jianren Fan
IV-04	Engineering Computational Methods for Physics-Driven Cross-Scale High-Speed Transport of Massive Granular Materials Dajun Xin, Chen Zhao, and Kun Xue
IV-05	A Machine Learning-Enhanced Criterion for Single Particles in Complex 2D Stress States Xiang Gao, Pei Wang, and Zhen-yu Yin
IV-06	Accelerating Reinforcement Learning for Robotic Control on Deformable Terrain using Graph Neural Simulators Cheng-Hsi Hsiao, and Krishna Kumar
IV-07	Calibration of a DEM soil model during soil-tool interaction using IMU sensor data on internal soil movement Bence Szabó, Máté Harmat, László Kovács, and Kornél Tamás
IV-08	Data-driven discovery of rheological model for steady-state and transient granular flows Xu Han, Fiona C.Y.Kwok, Lu Jing, Gengchao Yang, and Yuri Dumaresq Sobral
IV-09	Fundamental study on a reduced-order model for gas-solid-liquid flow simulations Masato Kuzasa, and Mikio Sakai
IV-10	DEM Simulation of Ballast Grains Generation using K-means Algorithm and Morphology Analysis Jitinun Prommarin, Peerapong Jitsangiam, Theeradon Somsri, Mathieu Renouf, and Emilien Azéma
IV-11	Influence of railway track structural design on differential settlement of ballasted track in transition zones Alireza Ahmadi, Kourosh Nasrollahi, and Stefan Larsson
IV-12	Distinct Lattice Spring Model (DLSM): A thermo-mechanical modelling technique to support the composite refractory microstructure design Harikeshava Ranganathan, Damien Andre, Mossaab Mouiya, Marc Huger, Ratana Soth, and Christoph Wöhrmeyer
IV-13	Evaluation of compression properties of elastic particle molded compacts using discrete element method Sota Kubo, Shuji Ohsaki, Hideya Nakamura, and Satoru Watano
IV-14	Numerical approach to improve adhesive property of particles Atsushi Omori, Shuji Ohsaki, Hideya Nakamura, and Satoru Watano
IV-15	Assessing the Flexural Strength of Porous Ceramics Using the Ring-on-Ring Test: A DEM-Based Approach Zixian Li, Christophe L. Martin, and Zilin Yan
IV-16	Temperature-dependent flow control for hopper discharge using shape memory particles Jiawei Han, Xiaohan Wu, and Yu Guo
IV-17	Development of a new simulation model of coagulation of metal particles during flattening process Takuya Kojima, Kizuku Kushimoto, and Junya Kano
IV-18	Calendering Process Optimization in Dry Electrode Manufacturing Seungwoo Lee, Hayoon Kim, Sungbin Jeon, and Junyoung Park
IV-19	Modeling of the fragmentation of UO2 nuclear fuel pellet during an accidental situation using a coupled DEM-CZM model A. Nusslé, F. Dubois, R. Masson, Y. Monerie, E. Muller, and J.-M. Vanson
IV-20	DEM analysis of large deformations and failures of flexible mesh structures based on Minkowski sum method Qingwei Xu, Siqiang Wang, and Shunying Ji
IV-21	Collision time of an inelastic ball on a vibrating plate: DEM simulation Rafael Alberto M. Bagood, Junius André F. Balista, and Caesar A. Saloma
IV-22	Simulating the Abrasion of Arbitrarily Shaped Particles in DEM Haydn Rogan, Kevin J. Hanley, and Rosario Capozza
IV-23	DEM Simulation of Liquid Coating and Liquid Transfer in a Twin Screw Wet Granulator Yu Wang, Kiran Iyer, Amir Esteghamatian, Pankaj Doshi, and Eldin Wee Chuan Lim
IV-24	Effect of Liquid Bridge Force Implementation Method on DEM Simulation for Wet Powder Behavior Tomotaka Otsu, Hideya Nakamura, Shuji Ohsaki, and Satoru Watano
IV-25	Hybrid modeling for powder industries utilizing a physics-inspired data-driven approach Somayeh Hosseinhashemi, Christoph Thon, and Carsten Schilde

16:50-18:00

Afternoon Session II
(Chair: Takuya Tsuji/Anthony Richard Thornton)

Location: Room A: 2F Hall

Advanced Modelling & Simulation for Discrete Element Methods

Honghua Zhao, and Xingli Zhang, "The Force and Dynamic Response of Low-Velocity Projectile Impact into 3D Dense Wet Granular Media"

Cerun Alex Varkey, Kostas Giannis, Sebastian Melzig, Carsten Schilde, and Sabrina Zellmer, "Advanced Contact Modeling for Mechanical Optimization of Halide Solid Electrolytes in All-Solid-State Batteries Using Discrete Element Method"

Invited Lecture:
Toshitsugu Tanaka, Kaito Kudo, Kimiaki Washino, and Takuya Tsuji, "On the modelling of cohesion force for DEM-CFD simulation of fluidized behavior of cohesive particles"

Afternoon Session II
(Chair: Yuntian Feng/Toru Ishigami)

Location: Room B: 4F 407 Room

Advanced Modelling & Simulation for Discrete Element Methods

Invited Lecture:
Zongyan Zhou, Jielong He, and Yuelei Wang, "Similarity analysis of size-induced radial and axial segregation during the scaling-up of rotating drums"

Yihang Wu, Beibing Dai, Jun Yang, and Yi Pik Cheng, "Experimental and numerical investigation of uniaxial compression behavior of individual particles with intra-particle voids"

Hao Shi, Cihan Cengiz, Giulia Macaro, Mario Martinelli, Jovana Jovanova, and Dingena Schott, "Calibration, verification and validation DEM modelling framework on plate and pile penetrations in a double-layer scour protection system"

Afternoon Session II
(Chair: Rouven Weiler)

Location: Room C: 4F 408 Room

Industrial Application of DEM & CFD-DEM

Huihuan Ma, and Boen Li, "Local scour mechanism around submarine pipelines using CFD-DEM: Experimental and numerical study"

Mitchell Boots, Mark Jones, and Peter Robinson, "Predicting Powder Flow from Containers with Flexible Walls"

Zheng Hu, Z. X. Yang , N. Guo, and Y. D. Zhang, "Multiscale modeling of suffusion-induced fines loss and slope failure using a coupled FEM-DEM approach"

Afternoon Session II
(Chair: Wei Ge/Kizuku Kushimoto)

Location: Room D: 4F 409 Room

Coupled discrete element method and computational fluid dynamics

Yuxin Tian, Q.Q. Liu, and X.L. Wang, "Flow structure and mechanism of dense granular flow under interaction of obstacles"

Vidura Yashodha Gamage, Shoma Kato, Mitsuaki Matsuo, Junya Aono, and Yohsuke Matsushita, "Overcoming Challenges in the Powder Industry with iGRAF: A Multiphase Simulation Approach"

Dianyu E, Yingming Wen, Yiliu Wu, Jiaxin Cui, and Yinxuan Qiu, "Hydrodynamics of heterogeneous particle swarm in gas-liquid-solid stirred tanks with free surface studied by DEM-VOF"

19:00-21:00

Banquet

Day 2: July 3

8:00-8:30

Conference Photo

8:30-9:50

Plenary talks
(Chair: Kimiaki Washino)

Location: Room A: 2F Hall

Discrete element method for deformable particles/structures

Shunying Ji

Machine learning-based surrogate model of DEM simulation for particle mixing

Hideya Nakamura

9:50-10:10

Coffee break

10:10-12:00

Morning Session
(Chair: Toru Ishigami/Shuo Li)

Location: Room A: 2F Hall

Data-driven modeling for granular and multiphase flows

Wenjie Wu, and Yanjie Li, "Prediction of particle mixing process in a rotating drum based on machine learning method"

Tingting Zhao, and Kaixuan Ju, "A data-driven dimensional analysis method for impact process of granular materials"

Ahmed Hadi, Yusong Pang, and Dingena Schott, "Systematic DEM calibration of two-component mixtures using AI-accelerated surrogate models"

Invited Lecture:
Tongming Qu, Zizun Zhu, and Jidong Zhao, "Towards next-generation granular modelling: from 2D images to 3D DEM×FEM multiscale simulations"

Morning Session
(Chair: Jin Y. Ooi/Carlos Labra)

Location: Room B: 4F 407 Room

Novel Contact Models and Advanced Physics

Invited Lecture:
Stefan Luding, "Improved contact models for discrete element method simulations"

Invited Lecture:
Yuntian Feng, "Contact Modelling of 3D Membrane/Shell Particles in DEM"

Invited Lecture:
Carlos Labra, and Miguel Angel Celigueta, "A bond model for fibers with bifurcations and heterogeneities: from elasticity to diverse failure modes"

Igor Ostanin, "Discrete element simulations with long-range interactions using kernel-independent fast multipole method"

Kit Windows-Yule, A. Leonard Nicusan, Dominik Werner, Ben Jenkins, and Jonathan Seville, "Calibration of DEM Models of Industrial Systems: Learnings from a 6 year project with the International Fine Particle Research Institute"

Morning Session
(Chair: Kimiaki Washino/François Guillard)

Location: Room C: 4F 408 Room

Development and application of coarse-grained models for DEM

Junjie Lin, Shuai Wang, and Kun Luo, "Coarse-grained CFD-DEM simulation of chemical looping gasification for optimized H₂ production and CO₂ reduction"

Fei Li, Xing Zhao, and Wei Wang, "Coarse-grained MP-PIC modelling for fluidized bed"

Invited Lecture:
Lukas Maier, Michael Mitterlindner, and Stefan Radl, "A Pod-Based Approach to Model Interlocking Granular Materials and Beyond"

Invited Lecture:
Wei Ge, and Ji Xu, "Soft-shell coarse-grained discrete particle method for the simulation of industrial-scale particle-fluid systems"

Nobutaka Kitsunai, and Mikio Sakai, "Study on the DEM-CFD simulation for large-scale industrial solid–liquid flow systems"

Morning Session
(Chair: Kun Xue/Yu Guo)

Location: Room D: 4F 409 Room

Rheology of complex granular flows

Keynote Lecture:
Tivadar Pongó, Dariel Hernández-Delfin, Tamás Börzsönyi, and Raul Cruz Hidalgo, "Discharge of grains from a silo with rotating bottom"

Kiwamu Yoshii, and Michio Otsuki, "Jamming of weakly cohesive granular flow between parallel plates"

Jixiong Liu ,Lu Jing, and Thomas Pähtz, "Unifying grain shape effects in granular flows down a rough incline"

Lei Yang, Xiangyang Gong, and Chao Yang, "Capillary bridge behavior between spheres: Insights from experiment and numerical simulation"

Yuan Tan, Daniel Schiochet Nasato, and Heiko Briesen, "Impact of scaling factors on DEM-based rheological characterization of pharmaceutical powders"

Morning Session
(Chair: Catherine O’Sullivan/Mikito Furuichi)

Location: Room E: 4F 404 Room

Advanced Modelling & Simulation for Discrete Element Methods

Hans-Georg Matuttis, Gamaliel Jeevan Dewanto, and Jan Mueller, "Combining DEM-methods with physical fluid simulations "

Invited Lecture:
Yuki Tsunazawa, "A DEM Study on Efficient Mixing Mechanisms in a Pot Blender"

Shinya Kawakami, Yasushi Mino, and Mikio Sakai, "Rheological Properties and In-situ Observation of Particle Spatial Distributions in Suspensions"

Xinguang Zhu, Chun Feng, and Xingtan Li, "One - Dimensional Axisymmetric Bar Blast Source Model Based on Radial Decoupling and Its Application in Rock Blasting"

12:00-13:00

Luncheon seminar

Location: Room B: 4F 407 Room

LS4, Siemens K. K.

Luncheon seminar

Location: Room C: 4F 408 Room

LS5, Altair Engineering Ltd.

Luncheon seminar

Location: Room D: 4F 409 Room

LS6, The Association of Powder Process Industry and Engineering, JAPAN

13:00-13:40

Plenary talk
(Chair: Yasushi Mino)

Location: Room A: 2F Hall

Beyond Virtual Prototyping of Particulate Processes

Thomas Weinhart

13:40-14:00

Coffee break

14:00-16:10

Afternoon Session I
(Chair: Jidong Zhao/Tongming Qu)

Location: Room A: 2F Hall

Data-driven modeling for granular and multiphase flows

Hiroki Imai, Toshiki Imatani, and Mikio Sakai, "Validation study on a Heat Transfer modelin DEM–CFD Method"

Toru Chayamichi, Kosuke Hara, and Mikio Sakai, "Learning Excavation Models for Bulk Handling by Autonomous Machines and Application to Trajectory Generation"

Ahmed Hadi, Morteza Morad, Yusong Pang, and Dingena Schott, "Adaptive AI-based surrogate modelling via transfer learning for DEM simulation of multi-component segregation"

Invited Lecture:
Shuo Li, and Mikio Sakai, "An AI-accelerated multiscale surrogate modelling framework for CFD–DEM simulations"

Afternoon Session I
(Chair: Xia Li)

Location: Room B: 4F 407 Room

Advanced DEM analysis in geotechnical engineering

Keynote Lecture:
Ning Guo, Yihao Shi, and Zhongxuan Yang, "Modeling discrete-continuum interactions with coupled level-set DEM and MPM"

Invited Lecture:
Bin Gong, Chun’an Tang, and Yongjun Zhang, "Development of the rock discrete fracture analysis method based on RFPA and DEM"

Ryunosuke Kido, Chihiro Hamano, Bruno Chareyre, and Yosuke Higo, "Shear behavior of unsaturated granular media in the pendular saturation regime under drained and undrained conditions"

Arttu Polojarvi, and Jan Åström, "DEM simulations of large-scale sea ice deformation"

Dominik Krengel, Haoran Jiang, Jian Chen, and Takashi Matsushima, "The combined effect of particle angularity and friction on the properties of granular aggregates"

Afternoon Session I
(Chair: Alberto Di Renzo/Stefan Radl)

Location: Room C: 4F 408 Room

Development and application of coarse-grained models for DEM

Keynote Lecture:
Mikio Sakai, "On coarse-grained DEM as a scaling law model for the discrete element method"

Masanori Sato, and Mitsuo Hosoi, "Simulation of Excavator Digging for Wet Soil Using Scaled-Up DEM "

Dorian Faroux, Kimiaki Washino, Ei L. Chan, Tomoya Wakamatsu, Takuya Tsuji, Tatsuya Takahashi, and Shuji Sasabe, "Coarse Grained DEM Applied to Loose Packing of Fine and Cohesive Particles"

Balazs Fuvesi, Christoph Goniva, Vanessa Magnanimo, and Stefan Luding, "Towards coarse grained discrete element method simulations of industrial mixing processes"

Toshiki Imatani, and Mikio Sakai, "Study on a numerical stabilization approach in a DEM-VOF simulation"

Afternoon Session I
(Chair: Yuan Tan)

Location: Room D: 4F 409 Room

Rheology of complex granular flows

Weiyi Wang, Jonathan Barés, Mathieu Renouf, and Emilien Azema, "Flow Behavior and Microstructural Insights of Highly Non-Convex Platonic Polypods down an incline: A 3D Contact Dynamics Study"

Peter Watson, Lewis Traquair, Sebastien Vincent Bonnieu, Ali Anwar, and Marcello Lappa, "Investigating the Vibro-Fluidization of Lunar Regolith in Open systems: A Comparison Between Experiment and DEM Simulation"

Xiaoxing Liu, Xiaodong Yang, and Hui Guo, "DEM investigation on the dynamic characteristics of wall normal stress and particle flow during silo discharge"

Non-spherical particles in industrial applications
(Chair: Dingena L. Schott/Bettina Suhr/Hao Shi)

Siqiang Wang, Jinze Wu, and Shunying Ji, "DEM-LBM analysis of permeability characteristics of non-spherical granular materials"

Yongli Wu, Francesco Di Maio, and Peter Rem, "Enabling Smart Sorting Technologies in Waste Recycling and Mineral Processing through Discrete Element Method"

Afternoon Session I
(Chair: Toshitsugu Tanaka/Tokio Morimoto)

Location: Room E : 4F 404 Room

Advanced Modelling & Simulation for Discrete Element Methods/Novel Contact Models and Advanced Physics

Yun-Chi Chung, Yi-Chen Peng, and Chun-Cheng Yang, "Application of coupled DEM-FEM method to particle damping technology"

Dingeman L.H. van der Haven, and David S. Kammer, "Branched Coupling of Representative Volume Elements; fast hierarchical FEM-DEM simulations"

Invited Lecture:
Fernando Patino-Ramirez, and Catherine O’Sullivan, "A framework for design optimization using DEM"

Invited Lecture:
Jiansheng Xiang, Xiaowei Yang, Tongan Yang, Sadjad Naderi, and John-Paul Latham, "FDEM in Action: From Fracture Simulation to Neural Network-accelerated DEM applications in Engineering"

16:10-16:50

Coffee break + Poster session

Section I

I-01	Incorporating the Tavares UFRJ Breakage Model for Accurate Particle Fracture Analysis during Battery Electrode Calendering Simulations Jiashen Chen, Maryam Asachi, Ali Hassanpour, Meisam Babaie and Masoud Jabbari
I-02	DEM–CFD simulation on sequential powder die-filling processes in a rotary tablet press Arata Hashimoto, and Mikio Sakai
I-03	Implementation of an Ultrasonic Field Approach for Particle Levitation with DEM Simulations Dimitri Ivanov, Marvin Röhl, Trung Anh Nguyen, Jan Raffel, Christoph Lotz and Carsten Schilde
I-04	Investigation of Granular Behavior in a Vertically Vibrating Pipe by Using DEM Akihiro Okamoto, Takuya Tsuji, Masato Adachi, Sota Suzuki, Kimiaki Washino
I-05	Comparison of Grid Generation Methods for Contact Detection of Non-spherical Particles Denis Lobovikov, Elena Matygullina, and Polina Emshanova
I-06	Characterizing accuracy of coarse-grained DEM for granular shear flow with rolling resistance Kyota Mitsunashi, Hideya Nakamura, Shota Yokokawa, Naoki Kishida, Shuji Ohsaki and Satoru Watano
I-07	Neural Networks for Polydisperse Discrete Element Methods (NN4DEM) Tongan Yang, Jiansheng Xiang, Boyang Chen, Sadjad Naderi, Claire Heaney, Christopher Pain, Yanghua Wang, and John-Paul Latham
I-08	Surrogate model of DEM simulation of vertical high shear mixer Tamana Ichida, Hideya Nakamura, Shuji Ohsaki, and Satoru Watano
I-09	Analysis of metallurgical coke breakage to investigate pore structure effects using X-ray CT and Discrete Element Methods (DEM) Masahiko Watanabe, Zeynep Karatza, and Jin Y. Ooi
I-10	Impact of Crystal Diffusion on Crust Formation in a Drying Saline Droplet Benjamin Mignot, Tariq Mahmud, Peter J. Heggs, Mojtaba Ghadiri and Kevin J. Roberts
I-11	Fluid analysis inside a spiral jet mill using a reduced order model(ROM) with proper orthogonal decomposition(POD) Tatsuya Onishi, Kenji Jikihara, Keitaro Nakamura, Shuo Li, and Mikio Sakai
I-12	Effectiveness and Limitation of Volume-Interacting Level Set DEM (VLS-DEM) Kenta Okuno, Takuya Tsuji, Kimiaki Washino, and Toshitsugu Tanaka
I-13	Numerical simulation of the influence of bedding plane on hydraulic fracture reorientation based on discrete element method Yuhang Lin, and Chun Liu
I-14	UniDEM, a 3D DEM software for coupled solid body simulations László Pásthy, and Kornél Tamás
I-15	“Interface-resolved DNS studies on multiphase flows with finite-volume flexible fibers” Junjie Chen, and Yu Guo
I-16	Numerical investigation on the mesoscopic mechanism of erosion above uniform and graded sediment under oscillatory flow using the CFD-DEM method Shuye Zhang, Zhen-yu Yin, and Huihuan Ma
I-17	Multiscale investigation on explosive dispersal of granular media Lvlan Miao, and Kun Xue
I-18	Transition between 1D and 3D intraparticle representations for heat transfer in DEM-CFD simulations Maximilian Brömmer, Enric Illana, and Viktor Scherer
I-19	Unraveling Segregation Mechanisms during Spray Drying of Bidisperse Suspensions via CFD-DEM coupling Silas Wolf, Boris Krasovitov, Andrew Fominykh, Avi Levy, and Carsten Schilde
I-20	Point-based coarse graining CFD-DEM method for dilute to very dense particle-fluid systems Yuxiang Liu, and Lu Jing
I-21	A Novel Hybrid CFD-DEM Model for Simulating Scouring around Offshore Wind Turbine Foundation with Riprap Protection Dongkai Li, Zhihao Shen, and Gang Wang
I-22	Polymer-Induced Bridging Flocculation of Hematite Particles Using CFD-DEM Simulations Lequan Zeng, Jackquline C. Eardley, George V. Franks, and Eirini Goudeli
I-23	Validation of Bubble-Particle Attachment Model Using Three-Phase CFD (VOF)-DEM Simulation Tareq M. Al-Shami, Lequan Zeng, Eirini Goudeli, and George V. Franks
I-24	Investigation of the Influence of Interparticle Forces on the Rheological Behavior of Micro Particle Suspensions with Unresolved Coupled CFD-DEM Simulations Dimitri Ivanov, Mahmoud Eslami Pirharati, Inka Mai and Carsten Schilde

Section II

II-01	Role of floating grains in liquefaction on granular media Carolina Castro-Malaver, Manuel Cárdenas-Barrantes, Mathieu Renouf, David Cantor, Emilien Azéma, Carlos Ovalle, and Arcesio Lizcano
II-02	Fully-resolved LBM-DEM simulations of piping erosion during a suction bucket installation Samuel Kemmler, Pablo Cuéllar, Antoni Artinov, and Harald Köstler
II-03	Micromechanical Analysis of Natural Hydrate-Bearing Sediments During Gas Extraction Considering Hydrate Dissociation and Particle Breakage Chengkai Xu, Pei Wang, and Zhen-Yu Yin
II-04	Time-dependent fragmentation of particles in a corrosive environment P. Quiroz-Rojo, D. Cantor, M. Renouf, C. Ovalle and E. Azéma
II-05	Sensitivity Analysis on Critical Combinations of DEM Input Parameters in Granular Flow Analysis Junsen Xiao, Kenta Tozato, Reika Nomura, Yu Otake, Kenjiro Terada, and Shuji Moriguchi
II-06	A Review of the Mechanisms of Solid-Fluid State Transition in Geotechnical Granular Media Fei Li, Yihui Feng, Jinan Wang, Yidan Sun, SiYin Wu, and ZhiFeng Liang
II-07	Friction in Particle-Scale Models of Clay Yohei Nakamichi, Catherine O'Sullivan, Paul Tangney and Stefano Angioletti-Uberti
II-08	Effect of Particle Shape on Cohesion and Friction Angle in Clay studied by DEM Biaxial Shear Simulations Zhipeng Yu, Dominik Krengel, and Takashi Matsushima
II-09	The effect of rib inclination angle of reinforcements on the pullout resistance evolution Takeru Tamaoki and Ryunosuke Kido
II-10	Flexible Fiber Cluster-induced Resistance to Shock Waves Peng Wang, Kun Xue, and Yu Guo
II-11	Moment of Inertia of a Granular Mixture during Axial Segregation Aldrex D. Dacara, and Junius André F. Balista
II-12	Numerical analysis of grains with different aspect ratios in triangular obstacle silo Huhu Chen, Xuefeng Song, Fengwei Zhang, Fei Dai, Dongyu Liu, and Rongxu Shi
II-13	Accurate 3D Particle Reconstruction Using Large Vision Models Ruidong Li, Zhen-Yu Yin, Shao-Heng He, and Brian Sheil
II-14	Influence of shape randomness on the microstructure of granular materials: a 3D DEM investigation Duc-Cuong Pham, Farhang Radjai, Duc-Hanh Nguyen, and Lhassan Amarsid
II-15	Particle Shape Effects on Packing and Heat Transfer in Moving Beds Aidana Boribayeva, Assiya Baigarina, Arsen Musahanov, and Boris Golman
II-16	Pivoting Friction Effects from the Rising Egg Problem to the Stability of Heaps Shotaro Waki, Dominik Krengel, and Hans-Georg Matuttis
II-17	Study of the bubbling phase of a 3D pilot-scale bubbling fluidized bed simulated with CFD-DEM using the coarse-graining method Théo Ndereyimana, Yann Dufresne, and Stéphane Moreau
II-18	Elucidation on the suction effect on powder die filling by DEM-CFD simulation Masafumi Komiya, and Mikio Sakai
II-19	Numerical simulations of debris bed formation by CGDEM-CFD Boen Li, Toshiki Imatani, and Mikio Sakai
II-20	Towards accelerated multi-scale modelling of wet granulation processes using Coarse-Grained DEM and Graph Network Analysis Roxana Saghafian Larijani, Stefan Luding, and Vanessa Magnanimo
II-21	Simulation of Granulation Operation Using Discrete Element Method : A Coarse-grained Model Considering Liquid Bridge Forces. Osuke Hattori, Hidehiro Kamiya, Yutaro Takaya, and Chiharu Tokoro
II-22	DEM simulation of media stirred mill performance using different size and material media Yuki Murata, Hidehiro Kamiya, Osamu Ishikawa, Satoshi Shina, Yuma Hatakeyama, Yutaro Takaya, and Chiharu Tokoro
II-23	Multi-scale Numerical Modelling of Excavation Support Fluids Yongxin Wang, Si Suo, Martin Blunt, and Catherine O’Sullivan

Section III

III-01	Stability Analysis of Cylindrical Columns Made of Wet Granular Materials Ryusuke Inoue, and Michio Otsuki
III-02	Formation of Focused Granular Jets: A DEM Simulation Study Dongyun He, Kazuya U. Kobayashi, Pradipto, Prasad Sonar, and Yoshiyuki Tagawa
III-03	CFD-DEM simulation of particle removal in channel-cavity flows Minh Tam Nguyen, Junyoung Park, and Dongjoo Kim
III-04	Stabilizing Coupled FEM-DEM Simulations of Submerged Barchans with an Improved Choice of Boundary Conditions Gamaliel Jeevan Dewanto, Pawel Deren, and Hans-Georg Matuttis
III-05	Micromechanic simulation of liquefaction under vibration Kanata Yamashita, Gamaliel Jeevan Dewanto, and Hans-Georg Matuttis
III-06	Effect of parameters on hopper blockage by DEM Mitsumasa Kimata, and Yuri Haneishi
III-07	Drag Forces Working on Large Spheres Sinking / Floating in Gas-Fluidized Beds Shinichi Matsumoto, Takuya Tsuji, Kimiaki Washino, Toshitsugu Tanaka, Jun Oshitani, and Shusaku Harada
III-08	Numerical Model for Dense Particulate Multiphase Flows with Chemical Reactions Yuki Yakata, Takuya Tsuji, Kimiaki Washino, Toshitsugu Tanaka, and Ryoichi Kurose
III-09	Numerical analysis on failure mode of 3D columnar polycrystalline ice based on discrete element method Dianzhe Li, Lu Liu, and Shunying Ji
III-10	Transition in granular flow in a silo through the lens of acceleration fields Deepak Sharma, and Ashish Bhateja
III-11	Experimental and numerical analysis of fine powder bed compaction under artificial gravity for Additive Manufacturing Zhazira Berkinova, Assem Sauirbayeva, Almaz Kenzheshov, Boris Golman, and Christos Spitas
III-12	Outcomes and Learnings from 4 Years of Research on DEM Calibration B.D. Jenkins, A.L. Nicusan, A. Neveu, G. Lumay, F. Francqui, J.P.K. Seville, and C.R.K. Windows-Yule
III-13	A determination method of DEM parameters using post-excavated soil geometry data Naoki Iikawa, and Masanori Sato
III-14	CFD-DEM Simulation of Particle Deposition and Clogging Between Two Adjacent Fibers Jaesung Choi, and Dongjoo Kim
III-15	Numerical Simulation on Breakup and Granulation of Copper Slag Yuchen Jiang, Yunan Chen, and Bin Chen
III-16	Simulation of Particle Removal from a Flat Surface by Combining Blowing Jets and Suction Minsu Kim, Junyoung Park, and Dongjoo Kim
III-17	Inter-particle Force Modelling to Simulate Noodle Dough Using DEM Yui Sasaki, Kenya Kuwagi, Mei Kawahara, Yoshimasa Yagiri, Teppei Yokomizo, and Yasuo Suzuki
III-18	Industrial Applications of DEM Introduction to Powder and Fluid Simulation Software "iGRAF Shoma Kato, Vidura Gamage, Junya Aono, Mitsuaki Matsuo and Yohsuke Matsushita
III-19	Dynamics of underwater granular collapse on rough beds by CFD-DEM simulation Menghan Pan, Jiajun Jiao, Xiaoliang Wang, and Qingquan Liu
III-20	Recent developments in iGRAF: Coupling of DEM and DPM Yohsuke Matsushita, Junya Aono, Shoma Kato, Vidura Gamage and Kaoru Watanabe
III-21	Exploration of percolation in large size ratio two-sized vibrated systems using DEM A. Wiggin, C. R. K. Windows-Yule, T. Abadie, S. Fong and P. D. D. Monks
III-22	Numerical Simulation of Electrode Structure Considering Shape Anisotropy of Active Material in All-Solid-State Batteries Koki Sato, Magnus So, Takeru Yano, Shusaku Asano, and Gen Inoue
III-23	Investigating compression properties of solid electrolyte powders for all-solid-state lithium-ion batteries Motoshi Iwao, Hideya Nakamura, Takamasa Asano, Atsushi Sakuda, Akitoshi Hayashi, Shuji Ohsaki and Satoru Watano
III-24	Numerical analysis of consolidation and agglomerate disintegration behavior of bimodal-sized particles under compression and shear application Hiroaki Yoshitomi, Takeru Yano, and Shuji Ohsaki, Hideya Nakamura, and Satoru Watano
III-25	CFD-DEM Study of the Effect of Particle Shape on the Hydrodynamics of a Fluidized Bed Ainkara Karthiga R, Narasimha Mangadoddy, Vikrant Verma

Section IV

IV-01	High-speed Simulations using Multi-timescale Reduced-Order Model in Gas-Solid Flows of a Large-scale Fluidized Bed Kai-en Yang, Shuo Li, and Mikio Sakai
IV-02	Reduced-order Modeling of Heat Transfer in Gas-Solid Flows with Deep Learning Michael Castro, Shuo Li, Kai-en Yang, Toshiki Imatani, and Mikio Sakai
IV-03	A Novel Data-driven Reduced-order Model for the Real-time Prediction of Gas-solid Heat Transfer in Fluidized Beds Xiaofei Li, Junjie Lin, Shuai Wang, Kun Luo, and Jianren Fan
IV-04	Engineering Computational Methods for Physics-Driven Cross-Scale High-Speed Transport of Massive Granular Materials Dajun Xin, Chen Zhao, and Kun Xue
IV-05	A Machine Learning-Enhanced Criterion for Single Particles in Complex 2D Stress States Xiang Gao, Pei Wang, and Zhen-yu Yin
IV-06	Accelerating Reinforcement Learning for Robotic Control on Deformable Terrain using Graph Neural Simulators Cheng-Hsi Hsiao, and Krishna Kumar
IV-07	Calibration of a DEM soil model during soil-tool interaction using IMU sensor data on internal soil movement Bence Szabó, Máté Harmat, László Kovács, and Kornél Tamás
IV-08	Data-driven discovery of rheological model for steady-state and transient granular flows Xu Han, Fiona C.Y.Kwok, Lu Jing, Gengchao Yang, and Yuri Dumaresq Sobral
IV-09	Fundamental study on a reduced-order model for gas-solid-liquid flow simulations Masato Kuzasa, and Mikio Sakai
IV-10	DEM Simulation of Ballast Grains Generation using K-means Algorithm and Morphology Analysis Jitinun Prommarin, Peerapong Jitsangiam, Theeradon Somsri, Mathieu Renouf, and Emilien Azéma
IV-11	Influence of railway track structural design on differential settlement of ballasted track in transition zones Alireza Ahmadi, Kourosh Nasrollahi, and Stefan Larsson
IV-12	Distinct Lattice Spring Model (DLSM): A thermo-mechanical modelling technique to support the composite refractory microstructure design Harikeshava Ranganathan, Damien Andre, Mossaab Mouiya, Marc Huger, Ratana Soth, and Christoph Wöhrmeyer
IV-13	Evaluation of compression properties of elastic particle molded compacts using discrete element method Sota Kubo, Shuji Ohsaki, Hideya Nakamura, and Satoru Watano
IV-14	Numerical approach to improve adhesive property of particles Atsushi Omori, Shuji Ohsaki, Hideya Nakamura, and Satoru Watano
IV-15	Assessing the Flexural Strength of Porous Ceramics Using the Ring-on-Ring Test: A DEM-Based Approach Zixian Li, Christophe L. Martin, and Zilin Yan
IV-16	Temperature-dependent flow control for hopper discharge using shape memory particles Jiawei Han, Xiaohan Wu, and Yu Guo
IV-17	Development of a new simulation model of coagulation of metal particles during flattening process Takuya Kojima, Kizuku Kushimoto, and Junya Kano
IV-18	Calendering Process Optimization in Dry Electrode Manufacturing Seungwoo Lee, Hayoon Kim, Sungbin Jeon, and Junyoung Park
IV-19	Modeling of the fragmentation of UO2 nuclear fuel pellet during an accidental situation using a coupled DEM-CZM model A. Nusslé, F. Dubois, R. Masson, Y. Monerie, E. Muller, and J.-M. Vanson
IV-20	DEM analysis of large deformations and failures of flexible mesh structures based on Minkowski sum method Qingwei Xu, Siqiang Wang, and Shunying Ji
IV-21	Collision time of an inelastic ball on a vibrating plate: DEM simulation Rafael Alberto M. Bagood, Junius André F. Balista, and Caesar A. Saloma
IV-22	Simulating the Abrasion of Arbitrarily Shaped Particles in DEM Haydn Rogan, Kevin J. Hanley, and Rosario Capozza
IV-23	DEM Simulation of Liquid Coating and Liquid Transfer in a Twin Screw Wet Granulator Yu Wang, Kiran Iyer, Amir Esteghamatian, Pankaj Doshi, and Eldin Wee Chuan Lim
IV-24	Effect of Liquid Bridge Force Implementation Method on DEM Simulation for Wet Powder Behavior Tomotaka Otsu, Hideya Nakamura, Shuji Ohsaki, and Satoru Watano
IV-25	Hybrid modeling for powder industries utilizing a physics-inspired data-driven approach Somayeh Hosseinhashemi, Christoph Thon, and Carsten Schilde

16:50-18:40

Afternoon Session II
(Chair: Jiansheng Xiang/Thomas Weinhart)

Location: Room A: 2F Hall

Advanced Modelling & Simulation for Discrete Element Methods

Michal Nitka, "3D Dynamic Analysis of Concrete Bending Beam Using DEM with Breakable Aggregates"

Invited Lecture:
Zhanping You, "Discrete Element Models of Asphalt Materials: Interaction of the Internal Structure with High Content of Ground Tire Rubber"

Shingo Ishihara, "Simulation of particle strength considering deformation in material processes"

Duc Chung Vu, Lhassan Amarsid, Jean-Yves Delenne, Vincent Richefeu, and Farhang Radjai, "Scaling law for impact-induced breakage of a single particle"

Mai Sawada, and Catherine O’Sullivan, "Sub-particle-scale simulation of droplet test to measure soil-liquid contact angle"

Afternoon Session II
(Chair: Shuji Moriguchi)

Location: Room B: 4F 407 Room

Advanced DEM analysis in geotechnical engineering

Rawiwan Sukhumkitcharoen, M. Otsubo, and J. Koseki, "DEM Simulation of Soil Liquefaction: Influence of Gravity on Resistance and Particle Instability"

Jiaying Liu, and Ziyu Jin, "Understanding the 3D responses of granular materials from the topological view"

Chao Zheng, Junqi Zhao, Mengteng Wang, Zhiyuan Wang, Shigang He, and Zihao Yang, "Effect of formation heterogeneity on PDC cutting characteristics with DEM approach"

Invited Lecture:
Takashi Matsushima, "Testing Sediment Transport Models by 3D-DEM/2D-CFD"

Afternoon Session II
(Chair: Yansong Shen/Shuai Wang)

Location: Room C: 4F 408 Room

Development and application of coarse-grained models for DEM

Ryosuke Mitani, Toshiki Imatani, Takuya Tano, Keita Yunoki, Shiori Kageyama, Yuki Shiraiwa, and Mikio Sakai, "Large-scale DEM-VOF simulation of gas-solid-liquid flows for industrial metal separator"

Sho Shimizu, and Mikio Sakai, "Numerical study on granular dynamics simulation for pneumatic conveying"

Vikrant Verma, and Johan. T. Padding, "Towards large scale CFD-DEM modeling of gas-solid fluidized beds"

Keynote Lecture:
Erasmo S. Napolitano, Francesco P. Di Maio, and Alberto Di Renzo, "Coarse graining strategy for tribocharging and electrostatic interactions"

Afternoon Session II
(Chair: Hao Shi/Dingena L. Schott)

Location: Room D: 4F 409 Room

Non-spherical particles in industrial applications

Keynote Lecture:
Yongzhi Zhao, Fulei Chen, and Lianyong Zhou,"Discrete element modeling and simulation of non-spherical particles"

Yang Wang, Jiang Cheng, Kai Sun, and Jianqun Yu, "An Efficient DEM Modelling and Experimental Verification for Wheat Seeds Based on the Double Ellipsoid Model"

Conghui Gu, Yufan Zhang, Yuan Liu, and Zhulin Yuan, "Mixing and flow characteristics of soft S-shaped biomass particles in a rotary drum by DEM"

Agathe Bignon, Emilien Azéma, and Mathieu Renouf, "Silo discharge dynamics: the impact of grain aspect ratio"

Raphaël Prat, Lhassan Amarsid, Carlo elia Doncecchi, and Thierry Carrard, "ExaDEM: a DEM Open Source Software for HPC platforms processing R-shape particles"

Afternoon Session II
(Chair: Kenya Kuwaki/Jiawei Hu)

Location: Room E : 4F 404 Room

Advanced Modelling & Simulation for Discrete Element Methods

Trung-Kien Nguyen, and Gaël COMBE, "Considering heterogeneous distribution of geomaterials in multi-scale FEMxDEM modeling"

Andrei-Leonard Nicusan, Dominik Werner, Dan Weston, Jack Sykes, Jack Grogan, Ben Jenkins, and Kit Windows-Yule "Stella.jl: Scalable, High-Level CPU-GPU Co-Processing Engine for Open-Source DEM"

Day 3: July 4

8:30-9:50	Plenary talks (Chair: Yuki Tsunazawa) Location: Room A: 2F Hall Packing and rheology of frictional hyperspheres François Guillard A Decade with the Discrete-Element-Method in Chemical Industry Rouven Weiler
9:50-10:10	Coffee break
10:10-11:40	Morning Session (Chair: Zhanping You/Junya Kano) Location: Room A: 2F Hall Advanced Modelling & Simulation for Discrete Element Methods Chun Liu, Yintong Min, Maoyi Mao, and Jiaqi Wu, "AI Identification of engineering events based on vibration signals and discrete element numerical simulations" Invited Lecture: Toru Ishigami, Ayumu Seki, Mohammadreza Shirzadi, Tomonori Fukasawa, and Kunihiro Fukui, "Resolved CFD-DEM simulation of particle deposition on bag filter media obtained from X-ray computed tomography images" Kazuki Shioiri, Kizuku Kushimoto, and Junya Kano, "Reduced Parameters for Bonded Particle Methods" Lu Liu, and Shunying Ji, "Deep-learning-based DEM parametric calibration for sea ice load prediction on polar ships"	Morning Session (Chair: Gael Combe) Location: Room B: 4F 407 Room Advanced DEM analysis in geotechnical engineering Aoxi Zhang, Chaofa Zhao, and Frédéric Collin, "Combined effects of cementation and initial static shear stress on the cyclic behaviour of granular soils" Si Suo, Yongxin Wang, Martin J. Blunt, and Catherine O’Sullivan, "Numerical Modeling of Fluid-Grain Interaction Force during Polymer Permeation in Sands" Keynote Lecture: Théo Dumas, Bruno Chareyre, and Antoine Naillon, "Triaxial test and DEM: effects of boundary conditions, specimen size, and more" Invited Lecture: Mathieu Renouf, Francesco Massi, and Alfredo Taboada, "Energetic and Vibrational Considerations during Gouge Initiation"	Morning Session (Chair: Bettina Suhr/Hiroki Imai) Location: Room C: 4F 408 Room DEM modelling in the field of railway systems Anita Ullrich, and Johannes Quist, "Simulation of Railway Transition Zones using a DEM-FEM coupling" Daisuke Nishiura, Hirotaka Sakai, and Akira Aikawa, "Elastic Discrete Element Modeling of Railway Ballasted Track Dynamics" Akiko Kono, Takahisa Nakamura, and Takahiro Kageyama, "Influence of tamping conditions on ballast degradation" Bettina Suhr, and Klaus Six, "DEM modelling of wet sanded wheel-rail contacts: mechanisms of adhesion increase"	Morning Session (Chair: Charley Wu) Location: Room D: 4F 409 Room DEM for pharmaceutical and battery manufacturing Invited Lecture: Chengbo Liu, Tingting Liu, Kun Hong, and Xizhong Chen, "Differentiable Simulation and Optimization of Granular and Particle-Fluid System in Particulate Manufacturing" Shuji Ohsaki, Noriko Akiyama, Hideya Nakamura, and Satoru Watano, "Particle breakage behavior during the compression process of all-solid-state battery materials" Stefan Pantaleev, and Carlos Labra, "Multi-scale modelling of battery electrode calendering using a combined DEM-FEM approach" Magnus So, Takeru Yano, Shusaku Asano, Koki Sato, and Gen Inoue, "Simulating Fabrication and Cycling Expansion of All-Solid-State Batteries: Insights into Si Expansion, and AM-SE Delamination Using DEM"
12:00-13:00		Luncheon seminar Location: Room B: 4F 407 Room LS7, Cybernet Systems Co., Ltd.	Luncheon seminar Location: Room C: 4F 408 Room LS8, RCPE GmbH	Luncheon seminar Location: Room D: 4F 409 Room LS9, IDAJ Co., LTD.
13:00-14:50	Afternoon Session I (Chair: Stefan Luding/Shingo Ishihara) Location: Room A: 2F Hall Advanced Modelling & Simulation for Discrete Element Methods Malith Prasanna, Arttu Polojärvi, and Jan Åström, "DEM study on pack ice fragmentation within an offshore wind farm" Cheng-Chuan Lin, Ling-Xuan Meng, and Yun-Chi Chung, "Linking Macro Properties with Micro Nature for Granular Heat Transfer" Benjy Marks, and François Guillard, "Browser-based DEM for teaching soil mechanics" Invited Lecture: Anthony Richard Thornton, and Daniel Barreto, "ON-DEM: Progress, Collaboration, and Future Directions in DEM" John P. Morrissey, Hrachya Kocharyan, and Catherine O’Sullivan, "ON-DEM DB – a database of DEM contact models to aid reproducible research and enhance data FAIRness"	Afternoon Session I (Chair: Bruno Chareyre) Location: Room B: 4F 407 Room Advanced DEM analysis in geotechnical engineering Ruixiao Zhang, Dong Su, and Xiang-Sheng Chen, "Three-dimensional granular column collapse: Impact of column thickness" Usman Ali, and Mamoru Kikumoto, "Crushing-induced size and shape evolution effect on critical states of soils" Lixiang Wang, Xinguang Zhu, Yiming Zhang, and Chun Feng, "CDEM-Based Simulation of Hydraulic Fracturing: Insights into Perforation Design and Optimization" Invited Lecture: Shuji Moriguchi, T. Yoshikawa, M. Otsubo, A. Oya, A. Kono, M. Taue, H. Saomoto, and S. Kajiyama, "A Study on the Optimal Calculation setup for a Benchmark Problem Designed for the Discrete Element Method"	Afternoon Session I (Chair: Liz Del Cid) Location: Room C: 4F 408 Room DEM and Coupled Sims: Calibration of Industrial Applications Daniel Grasser, "Best practices for DEM and DEM-SPH calibration of industrial applications" Aleef Rahman, Liz Del Cid, Corin P. Holmes, and Jie Guo, "Enhancing Iron Ore Transfer Chute Design through DEM Validation and Physical Scale Modelling with Surrogate Materials" Pontus Malmskold, Anita Ullrich, and Johannes Quist, "Modeling and validation of wheel loader using a DEM-MBD co-simulation framework" Savitha Panikar, Liz Del Cid, and Roger Barnum, "A DEM Study of a Batch Blending Process"	Afternoon Session I (Chair: Shuji Ohsaki) Location: Room D: 4F 409 Room DEM with Deformable Particles/DEM for pharmaceutical and battery manufacturing Invited Lecture: Charley Wu, and Jiawei Hu, "Numerical Study of Volumetric Expansion for Granular Materials" Tianjin Li, Haitao Hu, He Yan, and Xingzhong Diao, "Multi-scale investigation on particle attrition in the small absorber sphere system of HTGR: Background and preliminary results" Xue Lian, Chuan-Yu Wu, "Determination of contact angles using DEM-SPH" Takeru Yano, Moritz Hofer, Shuji Ohsaki, Hideya Nakamura, Satoru Watano, Gen Inoue, Peter Michalowski, and Arno Kwade, "Structural Analysis and Tortuosity Evaluation of All-Solid-State Battery Electrodes Using DEM and a Pathfinding Algorithm" Jiawei Hu, Bernardus Joseph Nitert, Chao Zheng, Nicolin Govender, and Chuan-Yu Wu, "DEM Modelling and Experimental Investigates on Dynamic Powder Flow in a Commercial Continuous Blender"
14:50-15:10	Coffee break
15:10-16:50	Afternoon Session II (Chair: Zongyan Zhou/Ryosuke Mitani) Location: Room A: 2F Hall Advanced Modelling & Simulation for Discrete Element Methods Keynote Lecture: Nicolin Govender, Mashy Green, and Johannes Khinast, "Simulations of Industrial Applications using GPU Computing" Lianfeng (David) Liu, Shaobo He, and Stephen James Shaw, "DEM-CFD modelling of flows and breakages of small agglomerates" Romain Dupuis, Anthony Saliou, Katerina Ioannidou, Roland Pellenq, and Arnaud Poulesquen, "The importance of chemistry on cohesion: case study of geopolymers" Shuai Zhang, and Wei Ge, "Fluctuation and jamming of granular discharge"	Afternoon Session II (Chair: Masahide Ostubo) Location: Room B: 4F 407 Room Advanced DEM analysis in geotechnical engineering Yang Li, Masahide Ostubo, Itsuki Sato, and Hidenori Takahashi, "Investigating the breakage mechanics of high-porous granular materials via 3D-DEM" Tokio Morimoto, "Critical Appraisal of Various CFD Methods to Calculate Fluid-Particle Interaction Forces in Gap-graded Soils" Manuel Cardenas-Barrantes, and Carlos Ovalle, "Multiscale Insights into Sliding Surface Liquefaction"	Afternoon Session II (Chair: Ben Jenkins/Aaron Wiggin) Location: Room C: 4F 408 Room Novel Improvements and Applications of DEM for Industry Luis Marcelo Tavares, "Development of a Breakage Model and Track Record of its Application in Industry" Haoran Jiang, Hiroyuki Shimizu, and Shintaro Ohno, "A practical FEM-DEM coupling strategy for capturing the cracking propagation of reinforced concrete structures" Patricio Toledo, Manuel Moncada, Fernando Betancourt, and Cristian Rodríguez, "A novel algorithm for metaparticle size estimation in DEM simulations" Yuanqiang Tan, and Jie Li, "A novel adhesive model to simulate the compression molding of WC RTP granular"	Afternoon Session II (Chair: Saeid Nezamabadi) Location: Room D: 4F 409 Room Modeling soft deformable particles Joel T. Clemmer, and Jeremy B. Lechman, "Elastic deformation, plasticity, and fracture in granular compaction" Sota Arakawa, Mikito Furuichi, and Daisuke Nishiura, "Compression of Hierarchical Granular Piles Composed of Aggregates" Saeid Nezamabadi, F. Radjai, J. Y. Delenne, and S. Mora, "Modeling the Compaction of Cohesive Deformable Granular Materials"
16:50-17:10	Break
17:10-17:30	Concluding remarks Location: Room A: 2F Hall

Presentation Guidelines

Please refer to the appropriate guidelines depending on your presentation type.

Oral Presentation Guidelines

Please follow the guidelines below when preparing your regular oral presentation for DEM10:

Each oral presentation is allotted time that includes both the talk and discussion with the audience.
The allocated times are: 25 minutes for keynote lectures, and 20 minutes each for invited and regular presentations.
Please use the same title for your presentation as the one used in your abstract.
A projector and microphone will be provided in each session room.
Presenters must bring their own laptops for the presentation.
The connection to the projector is via HDMI.

Poster Guidelines

Please follow the guidelines below when preparing your poster presentation for DEM10:

The maximum poster size is A0 portrait (free format).
Use the same title for your poster as the one used in your abstract.
Bring a high-resolution printed version of your poster with you to the conference.
Set up your poster at least one hour before your scheduled session begins.
Materials such as push pins, tape, or Velcro will be provided for mounting your poster.

Luncheon seminar

Day 1 (July 2)
- LS1:KOZO KEIKAKU ENGINEERING Inc.Room B
- LS2:Nippon Paint Holdings Co., Ltd.Room C
- LS3:Anton Paar Japan K.K.Room D
Day 2 (July 3)
- LS4:Siemens K. K.Room B
- LS5:Altair Engineering Ltd.Room C
- LS6:The Association of Powder Process Industry and Engineering, JAPANRoom D
Day 3 (July 4)
- LS7:Cybernet Systems Co., Ltd.Room B
- LS8:RCPE GmbHRoom C
- LS9:IDAJ Co., LTD.Room D

Participation in all luncheon seminars is free of charge for registered conference participants.
However, please note that seating is limited for each seminar, and registration will close once capacity is reached.